Acer Ipisb-vr Rev 1.01 Front Panel ❲2027❳

Connect the RESET SW cables to Pin 5 & 7 .

Locate the cluster of pins usually found on the bottom-right edge of the motherboard. Pin 1 is typically marked by a white square on the PCB. Pin Numbers Description

| Front Panel Component | Typical Wire Label(s) | Notes | | --------------------- | ------------------------------- | ------------------------------------------------------------- | | | POWER SW , PWR SW , PW SW | No polarity; connects to any two adjacent Power Switch pins. | | Reset Button | RESET SW , RESET , RST | No polarity; connects to any two adjacent Reset Switch pins. | | Power LED | POWER LED , PWR LED , PLED | Polarity sensitive! Connect + to the specified pin. | | HDD LED | HDD LED , HD LED , IDE LED | Polarity sensitive! Connect + to the specified pin. | acer ipisb-vr rev 1.01 front panel

(Front of case / SATA ports facing left) +-----+-----+-----+-----+-----+ | | | | | | | 10 | 9 | 8 | 7 | 6 | <-- Row 2 (closest to board edge) | | | | | | +-----+-----+-----+-----+-----+ | 5 | 4 | 3 | 2 | 1 | <-- Row 1 (inner row) +-----+-----+-----+-----+-----+

Plug the POWER SW connector into pins 6 and 8 . These are the two vertical pins located in the second row, second pair from the edge. Connect the RESET SW cables to Pin 5 & 7

The header is typically a 14-pin or 15-pin block. Pin 1 is identified by a printed on the motherboard's corner. Pin Numbers 1 (+) & 3 (-) HDD LED Indicates hard drive activity; polarity matters. 2 (+) & 4 (-) Power LED Lights up when the PC is on; polarity matters. 5 & 7 Reset Switch Restarts the PC; polarity does not matter. 6 & 8 Power Switch Turns the PC on/off; polarity does not matter. 10 No Pin Used as a "key" for orientation. 12 (+) & 14 (-) LAN LED

Note: Pins 11 through 14 extend past the key pin and are primarily used by the factory for proprietary auxiliary indicators, such as a LAN Activity LED (Pins 12 and 14). These can safely be left disconnected when using an aftermarket PC case. Step-by-Step Connection Instructions Pin Numbers Description | Front Panel Component |

If you try to connect a standard ATX case with individual 2-pin connectors, you’ll need:

For further troubleshooting, you can check the Acer Community Forum or the Tom's Hardware Forum for user-verified diagrams.

Note: Acer doesn’t publish an official universal pinout; below is a consolidated, commonly observed mapping for Rev 1.01 style boards. Confirm with continuity checks.

The Acer IPISB-VR Rev 1.01 Go to product viewer dialog for this item.