Acer Mcp73tad | Motherboard Manual Verified

Locate the 3-pin jumper on the motherboard (typically found near the round, silver CR2032 battery).

The MCP73T-AD supports a wide range of 65nm and 45nm Intel processors with Front Side Bus (FSB) speeds of . Supported families include: Core 2 Quad: Yorkfield and Kentsfield (up to 95W TDP) Core 2 Duo: Wolfdale, Conroe, and Allendale

Power Switch (PWR_SW) -> Orientation does not matter. Pin 9 (Top Row, Far Right): Dead pin / No connection. Clear CMOS Jumper (CLR_CMOS) acer mcp73tad motherboard manual verified

Use unbuffered, non-ECC DDR2 desktop RAM rated at 667 MHz or 800 MHz.

The board supports a maximum capacity of (2 x 2 GB modules). Locate the 3-pin jumper on the motherboard (typically

The board is limited to a maximum of 4GB DDR2 RAM . For optimal performance, users should install a matching pair of 2GB DDR2-800 modules. Front Panel Header Pinout

Navigate to the official Acer support website. Instead of searching by the motherboard model, search by your desktop's specific model number (e.g., "Aspire X1800", "Aspire X1700"). The official user guide and technical information are available there as downloadable PDFs under the "Documents" tab. This is the . Pin 9 (Top Row, Far Right): Dead pin / No connection

This motherboard safely handles processors up to 95W TDP . Do not attempt to install 105W or 130W Intel Core 2 Extreme processors, as this can overheat the power phases and cause permanent board failure. 3. Verified Front Panel Header Pinouts