Unplug the printer, locate the waste ink compartment at the rear/bottom, remove the single retaining screw, and slide out the cartridge. Wash and thoroughly dry the felt pads, or purchase cheap generic replacement foam online.
This message appears when the printer calculates that its physical waste ink pads are completely full.
: Provides advanced technical settings such as top margin adjustment, PF (Paper Feed) band adjustment, and scanner motor heat protection. Pros and Cons adjustment program epson xp 313 top
: Includes tools for head cleaning (weak, middle, and strong), ink charging, and printhead alignment to fix blurry output. Technical Settings
This happens when Windows blocks the program execution. Right-click the .exe file, go to Properties , and check the box at the bottom that says Unblock . Make sure to run it explicitly as an administrator. Unplug the printer, locate the waste ink compartment
If you reset the counter a second time down the road without addressing the physical ink, the pads will inevitably overflow, spilling black ink inside your machine's circuitry or onto your furniture. Solution A: Replace or Wash the Pads
Many versions are hardware-locked and will only work on the specific computer where they were first activated. 🛠️ How to Use the Adjustment Program Follow these steps carefully to reset your XP-313: Link your printer to your PC via (WiFi/Network resets often fail). AdjProg.exe . If requested, select your model ( ) and port ( Auto Selection usually works). Particular Adjustment Mode Select Function: Find and double-click Waste ink pad counter from the list. Check the boxes for Main pad counter to see the current usage. Check the boxes again and click Initialization . A pop-up will tell you to turn off the printer. Turn the printer on the program, and then turn the printer back . The error should be gone. 🔍 Alternative Tools : Provides advanced technical settings such as top
Scroll through the maintenance submenu, select Waste ink pad counter , and click OK .
Place a small piece of tape or a thin foam pad on the underside of the scanner cover right above that pin. This adds extra push when closed.