Contact
We are here for you
Please specify your message and type of request.
Tel.: +971 4 3417448 | Fax: +971 4 3417449
To attempt a repair, you must match the physical controller chip with the correct Mass Production (MP) tool. :
Before downloading any software, you must confirm the exact model of your Alcor Micro controller. MPTools are highly specific; flashing a chip with software meant for a different model can permanently destroy ("brick") the device.
Press the button. The program will delete the bad [FA00] error state and load working software back onto your flash drive.
The "Unknown [FA00]" status is often a generic placeholder for a hardware or software communication failure between the USB controller and the NAND flash memory.
Locate the physical pins leading out of the controller chip or the adjacent TSOP flash memory chip.
on the back of the motherboard; USB 3.0 ports or front-panel headers can cause communication timing errors during firmware updates. : Flashing firmware will permanently erase all data on the drive. specific version of AlcorMP based on your flash drive's total capacity?
is a common high-performance USB 2.0 flash drive controller often found in mid-tier storage devices. It is technically an alias for the
If successful, the status box will turn green and display an "OK" or "Pass" message. Your computer will now recognize the drive as a fresh, unformatted storage device. Troubleshooting Common Flashing Failures
: Visit specialized repositories like USBDev.ru to find the version of AlcorMP that supports your specific chip and the 3613 firmware. Prepare the Environment :
If the AlcorMP tool cannot detect the device, or if it errors out with a No FID message, the flash drive is suffering from a hard hardware lock.
Set the scanning parameters to Capacity Optimize . Change the scan depth profile from a simple check to Full Scan 4 . This forces the software to map around corrupted hardware nodes on the NAND chip.
In the tab, ensure the tool correctly identifies your NAND memory chip. Execute the Update :
Поддерживаются микроконтроллеры серии Alcor AU698x и AU699x: AU6989SN-GTC, AU6989SN-GTB, AU6989SNL-B, AU6998SN-GTA \ AU6989SN-GTA, Alcor Micro - USBDev.ru
Share page
Recommend this page
Recommend this page by sending a link by mail.
Share page
Thank you for your recommendation!
Your recommendation has been sent and should arrive shortly.
Contact
We are here for you
Please specify your message and type of request.
Tel.: +971 4 3417448 | Fax: +971 4 3417449
Contact
Thank you for your message!
Your message is send and will be processed shortly.
Our department for Service-Requests will contact you asap.
For general question regarding products or services you can also call:
Tel.: +971 4 3417448 | Fax: +971 4 3417449
Contact
We are here for you
Please specify your message and type of request.
Tel.: +971 4 3417448 | Fax: +971 4 3417449
Contact
Thank you for your message!
Your message is send and will be processed shortly.
Our department for Service-Requests will contact you asap.
For general question regarding products or services you can also call:
Tel.: +971 4 3417448 | Fax: +971 4 3417449