Mlx90614 Proteus Library [2021]

Important Simulation Tip: Real hardware absolutely requires physical pull-up resistors on the I2C lines to function. While some Proteus models simulate without them, adding the 4.7kΩ resistors guarantees realistic bus stability during multi-device communication simulations. Interfacing Arduino Code with the Simulation Model

.LIB file (contains the actual graphical model and simulation data). mlx90614 proteus library

The MLX90614 is a non-contact infrared thermometer sensor that can measure the temperature of an object without physically touching it. It is widely used in various applications such as temperature monitoring, heat detection, and thermal imaging. In this article, we will discuss how to use the MLX90614 library in Proteus, a popular circuit simulation software. The MLX90614 is a non-contact infrared thermometer sensor

or a Virtual Terminal for serial print debugging PCF8574 (Optional, if you want an I2C-driven LCD display) Resistors (Two 4.7kΩ resistors for I2C pull-up networks) Schematic Wiring Guide MLX90614 Pin Arduino Uno Pin Connection Type VCC 5V / 3.3V Power Rail Power Supply GND GND Power Rail SDA Analog Pin A4 I2C Data Line (Requires 4.7kΩ Pull-up to VCC) SCL Analog Pin A5 I2C Clock Line (Requires 4.7kΩ Pull-up to VCC) or a Virtual Terminal for serial print debugging

To add the MLX90614 to your simulation environment, follow these steps: Step 1: Download the Library Files

A custom Proteus library provides both the graphical schematic model and the underlying simulation file (HEX or DLL) that mimics the sensor's I2C registers in real-time. How to Install the MLX90614 Proteus Library