Latest version (as of 2017) is 80.14 or A0.07 depending on HP system. Only update if you have stability issues—a failed OEM BIOS brick requires a SPI programmer.
| Slot Type | Count | Notes | | :--- | :--- | :--- | | (Gen 2.0) | 1 | Electrically x16. Can add a low-profile GPU, but PSU may lack power connectors. | | PCIe x1 (Gen 2.0) | 1 | Often blocked by chassis or used for WiFi card. | | PCI (Legacy) | 0 | No conventional PCI slots. | | Half Mini PCIe | 1 | Usually for WiFi/BT module. | | SATA 3.0 (6Gb/s) | 2–4 | VER:12 typically has 3 ports (one for optical drive, two for HDD/SSD). | | SATA Power | None (powered via PSU cable). |
The is an excellent choice for users looking to repair or upgrade an existing HP ProDesk 400 G1/G2 system. Its primary advantages include: ms7860 ver 12 motherboard specs
Includes a mix of USB 3.0 (Lynx Point) and USB 2.0 ports.
, supporting 4th Generation Intel Core i3, i5, i7, Pentium, and Celeron processors (Haswell architecture). Intel H81 Express Two DDR3 DIMM slots supporting dual-channel memory. Max Capacity: Supports DDR3-1333 and DDR3-1600. Form Factor: (approximately 244 x 244 mm). Expansion Slots: 1x PCI Express x16 (3.0) for dedicated graphics cards. 3x PCI Express x1 for other expansion cards. 4x SATA ports (SATA II/III). Connectivity and Ports Video Output: Latest version (as of 2017) is 80
Includes high-quality capacitors and chokes to ensure stability and extended lifespan.
Earlier revisions (VER:6) used a 4-pin ATX 12V for CPU. VER:12 sometimes uses a smaller 2-pin + 4-pin combo—check your PSU plug before swapping boards. Can add a low-profile GPU, but PSU may lack power connectors
Because this board is geared toward business desktops, it has limitations regarding upgrades. It only has two memory slots and no USB 3.0 support on the rear I/O, though some implementations might include an internal header. BIOS and Management