E510 — Resetter Canon

Press and hold the button (the triangle inside a circle).

The green power light and the orange alarm light will flash alternately 7 times.

Open the Service Tool software and click or "Set" under the "Clear Ink Counter" or "Ink Absorber Counter" section. resetter canon e510

Knowing how to use a resetter is an essential skill for any owner of a Canon E510, as it allows you to bypass a common and frustrating printer lockup. The software method is generally the most reliable for a complete reset. Always remember that a reset should be combined with occasional physical maintenance to clean or replace the waste ink pads to prevent long-term damage to your printer.

Canon designs its printers with an internal counter that estimates when these pads will be saturated. Press and hold the button (the triangle inside a circle)

Once reset, the printer assumes new waste ink pads have been installed and immediately unlocks itself for regular operation. Step 1: Entering Service Mode

You must use a Windows PC. The Service Tool does not work on Mac or Linux. Knowing how to use a resetter is an

the Power button. The green light should blink for a moment and then stay solid, indicating the printer is in Service Mode. Software Reset (Service Tool)

When the counter reaches 100%, the printer locks itself down to prevent ink from leaking out of the bottom of the machine onto your desk.