If you are handy with electronics, open the printer side panel, remove the felt pads, wash them thoroughly with warm water and soap, dry them completely, and reinstall them. If you aren't comfortable doing this, take the printer to a service center after performing the reset to prevent a mess.
However, every G2010 owner eventually encounters a frustrating roadblock: the dreaded "Ink Absorber Full" or "Waste Ink Pad Full" error. When this happens, your printer stops working entirely. The only software solution to bypass this is a tool commonly known as the .
Final thought A resetter for the Canon G2010 is a pragmatic fix for a very specific, software-enforced stoppage. Used responsibly — with an inspection of the waste-ink pads, caution around downloads, and readiness to do or pay for physical maintenance if needed — it can restore a useful printer to service at low cost. But it’s not a substitute for replacing saturated pads or addressing real hardware issues; treat it as a bridge, not a permanent cure. resetter printer canon g2010
In the dropdown menu next to "Absorber," ensure Main is selected.
Are you seeing a on your printer's display right now? Resetting Canon G2010 Printer: A Simple Guide If you are handy with electronics, open the
A (sometimes called a "service tool" or "WIC resetter") is a small software program that communicates directly with your printer’s EEPROM (Electrically Erasable Programmable Read-Only Memory). It forces the waste ink counter back to zero.
While holding the Stop button, press and hold the button. When this happens, your printer stops working entirely
Turn the printer off and then back on to return to normal operation. Software Resetters