Simco Fmx002 Manual Full //top\\ -

The FMX-002 provides accurate readings within a compact, ergonomic frame. (low range) and up to (high range). Accuracy: of the reading. Measuring Distance: (approx. 1 inch). Ion Balance Range: (requires optional balance plate). Response Time: Less than 1 second. Power Source: 9V manganese battery (6F22). Weight: ) including battery. Operating Instructions

Reinsert the battery and slide the compartment cover closed. 5. Standard Calibration Procedure

0 to ±1.49 kV (Low range); ±1.0 kV to ±22.0 kV (High range). Measuring Distance: 1 inch ±1/64 inch (25mm ±0.5mm). Response Time: Less than 1 second. Display Refresh Rate: 5 times per second. Accuracy: ±10% of reading. Power Source: 9V Manganese battery (6F22Y). Weight: 140g (including battery). simco fmx002 manual full

A flat, polished aluminum plate (typically 6" x 6") mounted on an insulated stand.

Do you need assistance with for a specific manufacturing standard? The FMX-002 provides accurate readings within a compact,

A: The FMX-002 can detect voltages up to 20,000 volts. It cannot measure any charge higher than this range. The display will indicate "Exceed" or an error if the range is exceeded.

The FMX-002 uses a standard 9V alkaline battery (e.g., 6LR61 or MN1604). The manual specifies: Measuring Distance: (approx

Calibration must be performed under controlled laboratory conditions using a specialized parallel-plate charging system. Do not attempt to adjust internal pots manually, as this voids the manufacturer's warranty.

The sensor opening must remain clear of dust, debris, and moisture. Clean the aperture using a clean, dry cotton swab dipped in pure isopropyl alcohol (IPA). Allow it to air-dry completely before use. Do not touch or bend the delicate vibrating chopper sensor inside. Battery Replacement When the BATT indicator appears: Slide open the battery compartment door on the back. Disconnect the old 9V battery. Snap-in a high-quality alkaline or manganese 9V battery. Replace the cover. Calibration