A critical filtration component that removes oil vapor from the helium stream, requiring replacement every 30,000 hours. Installation and Operating Guidelines
He found the entry. *Cause: Low Voltage Lockout. Solution: Reset the internal protection relay and allow capacitors to discharge for 5 minutes. Do not force
: High-pressure gas is cooled via a water-cooled heat exchanger and then passed through an oil separator sumitomo f50 compressor manual new
Ensure the ambient facility temperature stays between 5 °C and 35 °C (41 °F to 95 °F). Running the unit over 28 °C (82 °F) can trigger cooling degradation and safety faults.
To keep the F-50 running continuously for its expected 20,000 to 30,000-hour lifespan, routine maintenance is mandatory. The Helium Adsorber (Crucial Maintenance Item) A critical filtration component that removes oil vapor
Minimum 6.0 to 9.0 liters per minute (L/min) Cooling Water Temperature: 5°C to 32°C (41°F to 90°F) Static Pressure: Approximately 1.60 to 1.65 MPa (at 20°C)
Check: Ensure the unit is sitting flat on its feet. Internal mechanical noise may indicate a failing scroll capsule or reverse phase rotation. Solution: Reset the internal protection relay and allow
Note: Cooling capacity may degrade if the ambient temperature exceeds 28°C (82°F). 3. Installation and Setup
Proper installation of the Sumitomo F-50 compressor is essential for safety and optimal cooling performance. Handling and Positioning