Wella Climazon Millenium Manual Install [portable] -

Once the structural frame is secure, complete the physical assembly of the heating unit.

Locate the mounting pin at the bottom of the Climazon head or top of the pole adapter.

: Typically uses the Acrobat 2004 Wandarm (Type WA04/75 or WA04/95). Floor Version wella climazon millenium manual install

Once mechanically assembled, perform the initial boot sequence to confirm full system functionality.

Q: Can I install the Wella Climazon Millenium myself? A: While it's possible to manually install the unit, we recommend consulting a qualified electrician or Wella-trained technician to ensure a successful installation. Once the structural frame is secure, complete the

Insert the extension arm into the wall bracket. Attach the spring arm (Acrobat) to the extension arm. Caution: The spring arm is under high tension and should only be released once the weight of the Climazon head is attached.

Wella Climazon Millennium (often referenced as the Climazon² Insert the extension arm into the wall bracket

The wall arm is the backbone of your installation. If you have a floor-stand model, you can skip to the next phase. For the common wall-mounted setup, follow these steps:

Push the three swivel castors into the pre-drilled holes on the underside of the pedestal base until they click into place. Ensure they are secure to prevent the unit from tipping.

Follow these steps to manually install the Wella Climazon Millenium:

Use the brake screws on the arm to adjust the swivel resistance and the internal tension screw to balance the vertical movement based on the head's weight. 4. Technical Maintenance and Resources