WARNING: IMPROPER ASSEMBLY MAY RESULT IN CATASTROPHIC FAILURE.
Increase or decrease the value of the currently selected parameter. 4. Basic Wiring Guide Power Input: Connect your power source (3.3V–30V) to the terminals. Load Connection: Connect your device (motor, valve, LED) to the terminals. Signal Warning:
Duration the signal stays low (0.000s - 9999s). Zk-pp2k Manual
According to product listings on AliExpress , the key specs include: : DC 3.3V - 30V. Frequency Range : 1Hz - 150KHz (Accuracy ~2%). Duty Cycle : 0.00% - 100%. Output Current : Rated up to 8A (Direct load drive).
Upon powering on, the device will emit a beep and display a boot logo. After approximately 30 seconds, you will see the or “Time & Date” screen. If you see a “No User” message, that is normal. Basic Wiring Guide Power Input: Connect your power source (3
Cycle to and rotate the knob to set the high time to 0.500 .
DC 3.3V to 30V (equipped with reverse polarity protection). Maximum Output Current: 8A (continuous driving capacity). According to product listings on AliExpress , the
If you set Width to 0.100s, Interval to 0.900s, and Count to 100, the load will turn on for a tenth of a second, then stay off for nine-tenths of a second, and repeat this 100 times.
Press and hold the encoder button for 2 seconds to enter the menu.