Zxd 3000 User Manual _hot_ <EASY>

Power rectifiers pull high volumes of air. Use low-pressure compressed air or an ESD-safe vacuum to clear dust accumulation from the front intake and rear exhaust weekly or quarterly depending on facility cleanliness.

85 V AC – 300 V AC (Full output power typically available from 150 V AC to 295 V AC) 45 Hz – 66 Hz Power Factor (PF) ≥ 0.99 (at nominal input and full load) THD (Total Harmonic Distortion) Nominal Output Voltage 48 V DC / 54 V DC (Adjustable based on system programming) Maximum Output Power 3000 W (Derating occurs at low AC input voltages) Output Current Up to 60 A at nominal output voltage Cooling Mechanism

Ambient temperature is too high, or the cooling fan is blocked/broken. zxd 3000 user manual

(frequently deployed in versions V5.5 and V5.6) features a high-density, compact architecture. Under optimal conditions, its , allowing network operators to scale power capacity within standard racks without requiring extra footprint. ZTE ZXD3000 Rectifier Overview and Specs | PDF - Scribd

For detailed schematics and technical, in-depth configuration, refer to the full . Another detailed document can be found at SJ-20141208170916-001-ZXD3000 (V5.5) Rectifier Module User Manual . Power rectifiers pull high volumes of air

Understanding the precise electrical parameters of the ZXD3000 ensures safe operation and proper system integration. Input Parameters 220 V AC to 240 V AC Input Voltage Range: 85 V AC to 300 V AC Frequency: 50 Hz / 60 Hz Maximum Input Current: 18.5 A Power Factor: ≥ 0.99 (at rated load) Output Parameters Rated Output Voltage: 48 V DC Adjustable Output Range: 42 V DC to 58 V DC Maximum Output Power: 3000 W Maximum Output Current: 60 A (at 50 V DC output) Peak Efficiency: ≥ 96% Dimensions and Environmental Limits Cooling: Forced air cooling via built-in DC fan

I can provide the exact steps to clear your specific error code. Share public link (frequently deployed in versions V5

If the ZXD3000 exhibits a Yellow or Red LED indicator, check this reference table to isolate and resolve the issue. Red LED Is On (Critical Fault)