Canon Service Tool V1074 New! -

While continuing to hold the Stop/Reset button, press and hold down the Power button. The green power LED light should turn on.

Compatibility & Use Cases

Extract the Canon Service Tool v1074 zip file and run the executable file ( ServiceTool_V1074.exe ) as an .

is one of the earliest iterations of the service utility. Modern printers (released after 2015-2018) often require much newer versions (e.g., v5000+ or v6000+) to communicate with updated firmware architectures. are you using? error code (e.g., 5B00, 1700) is appearing on your screen? Are you looking to physically replace the ink pads or just clear the software error? canon service tool v1074

Canon inkjet printers are renowned for their exceptional print quality and reliability. However, like all precision hardware, they are programmed with built-in safety mechanisms that can halt operations unexpectedly. The most common of these interruptions is the dreaded "Ink Absorber Full" error, often accompanied by error codes like 5B00 or 1700.

If the buttons are greyed out, the tool cannot detect your printer. This often happens if the printer is not properly in Service Mode or is connected wirelessly. Try re-entering Service Mode and check the USB connection.

The tool only resets the software counter; it does not replace the physical ink pads, which may overflow if not manually maintained, notes. While continuing to hold the Stop/Reset button, press

The V1074 version does not support the action you are trying to perform on this specific generation of printer. You may need an upgraded version like V5103 or V6000.

User reports also indicate partial compatibility beyond this list. It has reportedly worked on a Canon iP4850 but did not work on a Pixma MG2220.

. This is a hardware-level state that bypasses standard operating procedures. Enter Service Mode: is one of the earliest iterations of the service utility

The green power LED will blink for a few seconds and then settle into a solid, steady green light. Your computer may play a hardware connection sound or display a "Found New Hardware" wizard. Your printer is now officially in Service Mode.

Canon Service Tool v1074 is a specialized maintenance software primarily used to reset the internal waste ink absorber counter on older